Follow these easy steps below to set up Open Transport PPP to the Internet (If you need the Remote Access setup instructions, scroll down to the bottom.)

1. From the Apple menu, select Control Panels.

2. Open the TCP/IP control panel.

3. Set Connect via to PPP and Configure to Using PPP Server.

4. IP address, Router address and Subnet mask should all look like this: <will be supplied by server>

5. For Name server addr, make sure the box is blank. Also make sure that Additional Search Domains is blank as well.

6. Note: If you have a field called Starting Domain Name as shown on the screenshot above, make sure the box is empty. Some versions of Open Transport TCP/IP do no include the Starting and Ending Domain Name fields.

7. Close the window and confirm that you wish to save changes.

8. You should now restart your computer.

 

Remote Access Setup Instructions.

1. From the Apple menu, select Control Panels and choose Remote Access or PPP (depending on what you have in your Control Panel.)

2. Select Registered User.

3. In the Name field, enter your GlobalNet username. ie: username@surfglobal.net.

4. In the Password field, enter your password (the one you chose when you signed up to GlobalNet).

5. Place a checkmark in the Save Password box if you want Remote Access to save your password between sessions.

6. Enter in the phone number to dial in the number field, which should be the number which was provided from either GlobalNet or from our website.

Click Here for a list of Local Access Numbers.

7. Click on the Options button.

8. If you originally selected Remote Access from the Control Panels:

      * Click on the Protocol tab.

      * Under Use Protocol, select PPP.

      * Place a checkmark in the box beside Connect automatically when starting TCP/IP         applications.

9. If you originally selected PPP from the Control Panels:

       * Click on the Connection tab.

       * Place a checkmark in the box beside Connect automatically when starting TCP/IP          applications.

10. Click OK. To connect to GlobalNet, bring up the Remote Access or PPP control panel and click Connect. To disconnect, click on the Disconnect button.